• Glock vs Sig Sauer: Which is Better?

    When considering which pistol is the better one for you to buy, either as an addition to a budding collection, for home defense, or for personal defense, you may be wondering which is better – a Glock or a Sig Sauer? 

    Both of these handguns have their fans, and both have reasons that they are preferred. Both are accurate weapons, and a good value for the cost. Much of the decision will come down to personal preference, with the individual models that you look at (the Glock 17 or the Sig Sauer P226? The Glock 19 or the Sig Sauer P229?) making a difference. To make this decision, you should look at each weapon’s pros and cons in light of your intended use.

    A Look at Glock

    Glock is an Austrian weapons manufacturer founded by head engineer Gaston Glock in the early 1980s.


    When he began engineering the Glock 17 in the 80s, Glock was new to weapon design. However, he was very familiar with advanced synthetic polymers. He assembled a group of specialists with the intent of designing a handgun for use by the Austrian Armed Forces in response to their announced search for a replacement for the P38, in use since World War II.

    Glocks use a high-strength, nylon-based polymer invented by their founder for the frame, magazine body, and other components. Polymer 2, as it’s called, is used to increase the Glock’s durability, making it more resilient than carbon steel and many steel alloys. The polymer makes the Glock resistant to extreme temperatures as well as caustic liquids.

    The handguns are produced by the original Glock company in Austria, as well as by Glock, Inc, a division located in the United States. The handguns made by Glock, Inc. are identical in every way to their Austrian counterparts, with the exception of being stamped with USA instead of AUSTRIA. 

    A Look at SIG Sauer

    Sig Sauer

    SIG Sauer is the super partnership between German company Schweizerische Industrie Gesellschaft (SIG) and Swiss company J.P. Sauer & Sohn. Formed in 1976, the American arm of the company was known as SIGARMS. which was moved to New Hampshire from Virginia in 1990. In 2000, the American division was separated organizationally from the parent company, SIG Sauer GmbH and renamed in 2007 to SIG Sauer, Inc.

    SIG Sauer has a much longer history than Glock, with its roots going back to 1853. In addition to pistols, the company makes or has made AR-15s, shotguns, hunting rifles, suppressors, ammunition, optics, and air guns.

    SIG Sauer weapons are used by militaries all over the world, in particular the P226. This handgun is used by the New York City and Houston police departments, the U.S. Secret service, the Texas Rangers, US Air Marshals, the US Navy SEALs) the Royal Thai Army, the Finish Army, and the Emergency Response Team of the Royal Canadian Mounted Police, among others.

    Comparing the Glock and the SIG Sauer

    There are some general comparisons that can be made between these manufacturers’ weapons, but to truly evaluate Glock versus SIG Sauer you’ll need to look at the specs of the specific models. We’ll review two of the most commonly compared models – the Sig Sauer P229 with the Glock 19.


    For these two specific models, the Glock 19 holds more rounds than the P229, with the Glock holding 15 rounds to the SIG’s 13. Glock magazines can be more affordable than the SIG’s as well since they are very common and very widely available.


    If you’ve seen a Glock and a SIG, you know that the SIG wins out in the looks category.

    The SIG P229 is a sleek, well-designed machine made from steel and with a variety of grips including rubber, wood, and plastic.

    The Glock on the other hand looks like… a Glock. It is boxy, simple, and clearly designed for function, not aesthetics. 


    When it comes to sights, it’s hard to beat the SIG’s night sights. The Glock, by comparison, has standard U-shaped target sights. If you choose the Glock, you may want to consider upgrading the sights.


    Most consider the accuracy of these two pistols to be highly comparable. How accurate you are with either one may be a factor more of how comfortable it is and how much time you spend at the range with it.


    Given the last category, this becomes more important. You’ll want your handgun to be comfortable and enjoyable to fire, so handling each of these guns before purchase is important.

    There is a weight difference between the weapons. The Glock’s polymer construction makes it the lighter choice. However, that means that when you are using a higher caliber, the SIG handles recoil better than the Glock does.

    If you are looking for a well-concealed carry weapon, or a lighter one, the Glock will edge out the SIG in this category. If you’re not planning on carrying it around day to day, definitely chose based on the feel of the grip and its comfort in your hand.


    Here is another area of difference between these two.

    The SIG’s initial shot has a longer trigger pull due to the double-action/single-action design with a hammer fire. This means that, after the initial shot, the weapon stays cocked for a lighter trigger pull. This makes it similar to the M9.

    The Glock, on the other hand, is striker-fired and pulls consistently every time. If you’d prefer a consistent feel on every trigger pull, the Glock may be the better choice for you.

    In the end, the choice between these two brands is largely about preference, comfort, use, and expectations. With both brands being good values for what they offer, and being reliable and accurate weapons, choosing between them is most likely to come down to which one you like the most.

  • How to Clean a Glock Pistol

    Your Glock pistol is an investment. You want to keep it not only looking good but in top working condition. Doing that means performing regular maintenance and cleaning.

    Why You Should Disassemble Your Glock Pistol and Clean It

    Safety is the most important tenant of gun ownership. That doesn’t just mean practicing safety on the range, however. It means keeping your weapon safe and in excellent working condition no matter when or where.

    As you use your pistol, particles from the gunpowder and bullet, called residual fouling, are released into your weapon. This residue sticks to your barrel, and applying lubricant and oil can make the problem worse. In addition, environmental dust and other outside dirt can get into your Glock.

    This causes several problems for the Glock gun owner. First, this gunk can foul up your weapon, gumming up the mechanisms and increasing the chance for a firing failure. It can also lead to needed repairs. All of this, of course, impacts the weapon’s reliability. 

    Additionally, this dirt can impact accuracy. Whether you keep your Glock around for sport, home defense, or self-defense, safety, reliability, and accuracy should all be concerned. Cleaning is how you keep all three of these important factors from becoming concerned.

    What You Need to Clean a Glock Pistol

    Preparation is an essential part of keeping your Glock clean. Knowing what materials you need and the process for disassembling a Glock pistol and cleaning it will simplify the process. Additionally, the more you clean it, the more familiar you will be with the process, and the easier it will become.

    First, be sure to read your owner’s manual completely before you begin. While we offer guidelines and tips within this article of how to clean your Glock, nothing should replace the instructions that came with your weapon. Those instructions will include precisely how to take apart your model of pistol safely and clean it.

    Once you are ready to begin cleaning, you’ll need the following tools and materials:

    • A cleaning rod
    • Cleaning solvent
    • Cleaning patches
    • A slotted top that screws onto your rod
    • Lubricant/lubricating oil
    • Clean rags
    • Cotton swabs
    • A brush (a toothbrush dedicated to this task works well)
    • Safety goggles
    • Latex gloves
    • Copper or brass bore brush for your caliber

    You can also find gun cleaning kits that will include many of the items listed above.

    How to Disassemble Your Glock and Clean It

    Do not complete steps 1 and 2 unless the process has your full attention. Unintentional discharges happen most frequently when clearing and dry firing a Glock when the user is not paying attention to the task at hand.

    Step 1: Safety First

    Before you begin cleaning your Glock pistol, you must make sure that you and all others around you are safe. This means ensuring that your pistol is unloaded before you begin to disassemble and clean it. You should also ensure that there is no ammunition in the area in which you are cleaning the weapon.

    Begin by safely removing the magazine with the gun facing away from you. It’s important to remove the magazine so that a round is not inadvertently loaded after checking the chamber.

    Once the magazine is removed, then rack the slide to eject any round that might be in the chamber.

    With no magazine in the well and the chamber cleared, lock the slide back and open. Check the chamber visually and with your finger, as well as the bolt face and the magazine well to verify that the gun has been completely cleared.

    Step 2: Dry Fire

    To disassemble a Glock pistol, the weapon must be dry-fired. That is why it is crucial to begin by verifying that the weapon is clear before continuing on.

    Point the gun away from you or any other people. Rack the slide and close the action. Ensure once more than the chamber is clear.

    While the slide is in battery, point the Glock pistol in a safe direction – again, away from you or where anyone else may be – and depress the trigger. You’ll feel the click of the firing pin. You cannot remove the slide if the trigger is not in the rearward position.

    Step Three: Disassemble the Glock Pistol

    Following the steps in your owner’s manual, disassemble the Glock pistol into its four main components: the slide, the barrel, the guide rod/recoil spring assembly, and the frame/receiver. 

    Step Four: Clean the Barrel

    The barrel is where the majority of the dirt, grime, carbon, and residual fouling will accumulate. 

    Going in the direction from the chamber to the muzzle, push a dry brush through the barrel. This will dislodge a good portion of the dirt and grime.

    Run the brush back and forth through the barrel a half dozen times or so, until debris stops coming out.

    Next, add some gun cleaner to a cleaning patch. Repeat the same action you used with the dry brush, but now with the cleaning patch, working from chamber to muzzle.

    Using a clean patch with gun cleaner on it, clean the feed ramps of the chamber and then wipe down the outside of the barrel. Now wipe down the outside of the barrel with your rag to remove any extra cleaner, and run a few dry patches through the barrel to do the same.

    Visually examine the barrel to make sure all of the debris has been removed, inside and out. The barrel should be shiny and uniform. However, if there are a few stubborn spots you shouldn’t stress out about them. Simply get it as clean as you can.

    Step Five: Clean the Recoil Spring, Guide Rod, and Slide

    The recoil spring and guide rod are easy to clean. Simply brush these and then wipe them down using a towel or rag.

    Cleaning the slide is a bit more involved. Wrap a patch around the bristles of the brush and, focusing on the rear, scrub the inside of the slide. Wipe down the slide as well, again concentrating on the rear, which accumulates fouling and build-up.

    Concentrate on the inside of the rails, cleaning any build-up there with a cotton swab. 

    Next, clean the breach face by pointing the muzzle end toward the floor and brush it clean. By angling it towards the floor you will prevent knocking debris into the rear of the slide.

    Step Six: Clean the Frame of the Glock

    Cleaning the frame is the easy part. For this, you can give the frame of your Glock a good wipe down and scrubbing, including to the top of the frame, the slide rails, and the trigger bar. If there is grime in the slide rails, wipe them down with a patch and cleaner and use your rag to wipe off the cleaner after that.

    The magazine rarely needs to be cleaned, but if it does you can find instructions on how to disassemble a Glock magazine for cleaning in your owner’s manual as well.

    Once cleaned, you can lubricate your pistol and reassemble it.

    Lubricate Your Glock Pistol

    Glocks do not require a lot of lubricant, and in fact, works better when lubricated with a light touch.

    Starting with the barrel, put some lubricant on a clean patch and run it through just as you did to clean it. Then run a dry patch through it the same way. Apply a small amount of lubricant to the outside of the barrel as well and apply it across the surface, then wipe it down with your rag. 

    You’ll also want to apply lubricant in some very specific places:

    • Between the lugs on the bottom of the barrel
    • Where the barrel interfaces with the slide
    • On the slide where it meets the barrel
    • On the front of the slide where the barrel comes through
    • On the slide rails, spreading with a patch
    • The slide rails on the frame
    • The raised metal bar that interfaces with the trigger bar on the rear of the frame

    Be sure to wipe everything down afterward with your rag to remove any excess.

    Once you have finished lubricating the pistol’s parts you are done. Reassemble the Glock, starting with the barrel, guide rod, and recoil spring, placing them back into the slide and the slide back into the frame.

    Once reassembled, point your Glock in a safe direction and dry fire once more to ensure that your Glock is functioning properly, nothing feels gritty, and the trigger is resetting. Add your left hand or right hand Clipdraw Belt Clip & SAF-T-BLOK Combo today.

    Source: Clipdraw

  • Shooting Range Safety Tips for Beginners

    Gearing up for your very first trip to the shooting range, or just need a quick refresher on shooting range safety? Study this guide for all the information you need about how to stay safe and follow the rules when practicing your aim at the shooting range. 

    Look for Range Rules Posted On a Sign, or Ask For a Copy

    Some of the tips that you’ll see in this article may already be posted as rules in the shooting range you plan to visit, but be sure to brush up on the specific rules of that facility before you load up your guns. There should be a large board or sign with the shooting range’s rules posted somewhere in the facility, or at the very list, printed copies of the rules for your review. 

    Always Keep Gun Pointed In Safe Direction

    No matter how sure you are that a gun is unloaded, you should always be conscious about where you point it. If you feel the need to make a comment about something in between shots, don’t simply point the gun at the ground and turn around to banter with your buddies — when you are done firing at your target, or if you want to take a quick break, the gun should be carefully placed on the bench with the cylinder pointed down-range. 

    Keep the Gun Completely Unloaded Until You Are Ready to Use it

    Do not preload all of the guns you plan to fire at the shooting range. If you plan on firing multiple guns, they should only be loaded right before firing. These may seem like tedious measures for a place you go to shoot guns, but it is in everyone’s best interest to avoid having more loaded weapons around than are currently in use. It’s important for everyone at a shooting range to be able to operate with the expectation — but not the assumption — that the only loaded weapons in the facility are the ones pointed safely down-range at non-living targets.

    Keep Your Finger Off Trigger Until You Are Ready to Shoot

    Again, even if you know the gun isn’t loaded, it should always be treated like it is. And when you know that it’s loaded, your finger should not touch the trigger unless you are pointing the gun at your target and fully prepared to blast a hole in it. If you are feeling unsure about anything, don’t let your finger linger on the trigger as you mull the situation over — ask for help, someone will be more than happy to offer assistance! 

    Beginners after learning safety tips at the gun range

    Ask For Help If You Are Unsure About Anything

    There’s no shame in being a beginner, everyone has to start somewhere! Moreover, there are plenty of experienced gun owners who encounter issues when testing out models that they aren’t familiar with. By asking for help when you encounter issues you can’t solve, you’re not just making the safest choice for everyone — you might just make someone’s day! The folks working at shooting ranges are all about gun safety and education, and they love talking shop. But most importantly, they want to provide the safest, most rewarding experience possible to everyone at the range. And that includes beginners!  

    Clipdraw Gun Clips for Concealed Carrying

    If you recently obtained a concealed carry permit, one of the things you may be practicing at the shooting range is your draw. The Clipdraw gun clip is an innovative holstering method that allows for compact concealment and quick drawing in the event of a violent threat. Learn more about Clipdraw gun clips and the gun models they are compatible with.

    Source: Clipdraw

  • Concealed Carry Tips for Beginners

    Whether you have already obtained a concealed carry permit and simply need a refresher or you’re conducting research to prepare for concealed carry class, you’ve come to the right place. 

    We’ve broken down the basics for you in this guide containing important concealed carry beginner tips. Here is a list of concealed carry “do’s and don’ts” to get you started:

    Concealed Carry Do’s and Don’ts 

    Do: Try to Carry As Often As Possible

    The point of carrying a concealed firearm is to have a method of defending yourself (and innocent bystanders) in the event of an unexpected assault, robbery, act of terror, etc. That said, you should strongly consider carrying pretty much everywhere you go, unless otherwise restricted by Federal, State, or local legislation. 

    Places You Shouldn’t Concealed Carry

    Here are some common examples of places where carrying a concealed firearm is illegal: 

    • School Zones
    • Federal Buildings
    • State & National Parks
    • Airports 

    Don’t: Draw Your Gun Unless You Intend to Use it

    This beginner tip should be strongly emphasized in concealed carry preparation courses, but it’s worth emphasizing once more here. You should never simply brandish your firearm in an attempt to de-escalate a situation with a violent attacker. The only way to de-escalate a situation where a criminal is jeopardizing innocent lives is to neutralize the attacker. In other words, once you draw your gun, you must be ready to fire at the attacker without hesitation. Otherwise, you risk provoking the attacker and further escalating the situation. It goes without saying that you better be 100% sure you have a good reason to draw, point, and fire your concealed firearm.

    When You Should Draw a Concealed Firearm

    In a nutshell, you should only draw a concealed firearm when someone (you or an innocent bystander) has reason to fear for their life or is at risk of great injury. There are other situations where the use of a concealed firearm may be acceptable, depending on State laws. Many states allow the use of a concealed firearm to stop an armed robbery, sexual assault, or other in-progress felonies. Be sure to know your State and Local regulations in that regard.

    Do: Practice & Perfect Your Holster Draw

    If you are new to concealed carrying, practicing and perfecting your holster draw is one of the most important tips. In the event of a life-threatening situation, split seconds could be the difference between life and death. 

    How to Practice Your Holster Draw

    You can practice your holster draw in private at home with an unloaded firearm to build up some muscle memory — just be sure to always holster in the same position to keep things consistent! Additionally, you should take some trips to the shooting range and practice drawing and actually firing your gun as you would in a life-threatening situation. 

    Don’t: Adjust or Reposition Your Holster in Public

    Even if you are just making a slight adjustment, an average bystander (or even a law enforcement officer) may see you reach for the gun holster and think you are preparing to draw and fire the weapon. In order to avoid such confusion, refrain from making any adjustments to your holster in public. 

    Where to Go When You Need to Adjust Your Holster

    If you absolutely need to make an adjustment to your holster, go somewhere private such as your car, a single-person bathroom, or better yet, go home if you can! 

    Do: Keep Your Permit With You While Carrying

    This should go without saying, but a beginner guide wouldn’t be complete without this tip, because you can land yourself in some serious trouble by carrying without a permit.

    Where to Keep Your Permit While Carrying
    You should always keep your permit on your person when you are carrying unless the laws in your state allow for permitless concealed carry. 

    Don’t: Carry While Consuming Alcohol

    Not only is it illegal to carry a concealed firearm while drinking or under the influence of alcohol, but it’s also simply unwise. Avoid guns completely while under the influence of any substance.

    What to Do With a Concealed Firearm Before You Start Drinking

    Your best bet is to simply leave the gun at home before going out for drinks. 

    Do: Know the Laws in Areas You Are Carrying

    Some states may require you to notify law enforcement officers who address you of any concealed firearms that you are carrying. Be sure you know exactly what to do if you get pulled over or otherwise confronted by a police officer in a scenario where you are carrying. 

    How to Tell Police Officers That You Are Carrying a Concealed Firearm

    Avoid saying something blunt like “I have a gun in here,” and instead opt for something to the effect of, “I have a license to carry a concealed firearm.”

    Don’t: Make it Obvious That You Are Carrying

    One of the benefits of carrying a concealed firearm is that you can catch a criminal by surprise — as long as you are concealing properly. If it’s obvious that you are carrying, you lose the element of surprise and may even become a primary target for a potential attacker.

    How to Discreetly Carry a Concealed Firearm

    In order to prevent ‘printing’, you must dress appropriately and choose a gun that is small enough to work with your wardrobe. Additionally, you’ll want a minimalistic holstering method.

    Do: Wear Clothes That Enable Discrete & Comfortable Concealment

    You may have to make some minor adjustments to your daily outfits whenever you are carrying a concealed firearm, but you can still

    Slim & Secure IWB Concealment

    dress fashionably while carrying!

    How to Dress for Concealed Carry

    The ideal outfit for concealed carrying will depend on your weapon of choice (and your fashion preferences). But generally speaking, you’ll want to wear a long shirt or jacket that covers the gun without hugging too tightly, to avoid printing.

    Holster With a Clipdraw Gun Clip for Minimal Printing

    Whether you are a beginner or long-time permit holder, finding a practical holstering method is crucial. Clipdraw offers a wide range of gun clips for various brands and models, providing an alternative to traditional holsters that make it tough to minimize printing. Find a Clipdraw Gun Clip for your weapon of choice today!

    Source: Clipdraw

  • Glock, Gun of Choice

    Today the Glock pistol has become the gun of choice for both criminals and law enforcement in the United States.

    In his book Glock: The Rise of America’s Gun, Paul Barrett traces how the sleek, high-capacity Austrian weapon found its way into Hollywood films and rap lyrics, not to mention two-thirds of all U.S. police departments.

    The Glock was created in 1982 by curtain-rod manufacturer Gaston Glock. Glock didn’t like the handguns available on the market and decided to manufacture a new gun from scratch. Before starting, he asked gun experts in his native Austria what could be done to improve a handgun for the modern era.

    “They said, ‘A gun with much larger ammunition capacity, a gun that is much more durable and reliable … [and] the gun should be easy to fire [and] easy to learn how to use,'” Barrett tells Fresh Air‘s Terry Gross. “He integrated all of those elements into the Glock, and that’s how he won his original contract with the Austrian army.”

    The original Glock 17, the model adopted by the Austrian army, contained only 36 parts and could hold 17 bullets in its magazine. It didn’t have an external safety like other semiautomatic handguns. It also didn’t have a decocking mechanism. The result? A lightweight, interchangeable model that could be dropped, submerged and subjected to temperature extremes — and still accurately fire.

    source: npr